SALUS CYLINDER PIPE THERMOSTAT CT100
PRODUCT SPECIFICATION Model: CT100.
The CT100 from Salus Controls is a practical surface mounted mechanical thermostat. The thermostat can be used to switch a circulating pump, boiler or most common motorised zone valves. The CT100 will allow the user to control the temperature of Domestic Hot Water Cylinders (both uninsulated and foam lagged), and is also supplied with a wire strap which enables the unit to be used as a pipe thermostat.
The CT100 thermostat requires no special maintenance. Periodically, the outer casing can be wiped clean using a dry cloth (please DO NOT use solvents, polishes, detergents or abrasive cleaners, as these can damage the thermostat). There are no user serviceable parts within the unit; any servicing or repairs should only be carried out by Salus Controls or their appointed agents.
Please read the important safety information at the start of this manual before you begin to install the device. NOTE: All electrical installation work should be carried out by a suitably qualified Electrician or other competent person. If you are not sure how to install this thermostat consult either with a qualified electrician, heating engineer or your boiler / heating system supplier for advice on how to continue. The CT100 thermostat should not be mounted in a location where it will come into direct contact with water, moisture or condensation. The location should also be accessible for the connection of the control wiring.
Surface mounted mechanical thermostat designed for hot water cylinder or pipe applications.
Height: 105 mm.
Width: 45 mm.
Depth: 50 mm.
Switching Voltage: 230V AC, 50Hz.
Switching Current: 16A resistive, 4A inductive.
Contact Type: Single Pole Double Throw (SPDT).
Range: 40 ºC to 80 ºC.
Operating Temperature: 0 ºC to + 55 ºC.
Storage Temperature: – 20 ºC to + 60 ºC.
- Surface Mounted.
- Easy Temperature Adjustment.
- Price Excludes VAT.
- Free Delivery Over £100.00.