END FEED REDUCED END TEE
End Feed Reduced End Tee allows a soldered connection to a copper pipe or tube of smaller diameter.
At Plumb Parts in Glasgow, we stock a large supply of jointing solutions that meet the changing needs of people who enjoy DIY, specifiers and installers alike.
END FEED FITTINGS
End Feed Fittings comprises a number of product ranges which suit a broad spectrum of applications across the domestic, industrial and commercial sectors.
The fittings’ compact dimensions make them the ideal choice for use in areas where there is limited space. Additionally, their smooth lines minimize flow restrictions and are unobtrusive on exposed pipelines.
End Feed Fittings are manufactured from copper, gunmetal or other dezincification resistant alloy (DZR).
End Feed Fittings are a simple and cost-effective method of jointing copper tubes to BS EN 1057. Light and neat, they make handling and installation easy.
Suitable for use on above ground hot and cold domestic/potable water services in small bore and mini bore central heating systems and in low-pressure steam heating and pressurised unvented heating systems Also suitable for sanitation services and compressed air lines, gas distribution systems for natural and manufactured gases, with fuel oils (hard solder only) and Kerosene, and on engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C
End Feed Fittings are designed for jointing copper tube manufactured to BS EN 1057 using soft or hard solder or a suitable brazing alloy.
With End Feed Fittings the joint is created through the process of capillary action. When the fitting and tube are assembled and heated to the correct temperature, solder applied to the mouth of the fitting becomes molten. Capillary attraction ensures the solder is drawn into the gap between tube and fitting, forming a sturdy and reliable joint.
For fuel oils always consult OFTEC for advice if you are using End feed Fittings.
At Plumb Parts our range of End Feed Fittings includes:
Straight Couplers, Imperial to Metric Couplers, Slip Couplers, Reducing Couplers , Male Couplers , Female Couplers , Elbows 90 deg , Obtuse Elbows 45 deg , Street Elbows , Obtuse Street Elbows 45 deg , Wallplate Elbows , Long Radius Elbows , Long Radius Street Elbows , Long Shank Street Elbows Angled Wallplate Adaptors ,Stop Ends , Fitting Reducers , Long Fitting Reducers , Full Crossovers , Partial Crossovers , Straight Tap Connectors , Bent Tap Connectors , Air Vents , Tees , Reduced Branch Tee , Both Ends Reduced Tee , Reduced End Tee , Reduced End and Branch Tee , Straight Cylinder Union , Bent Cylinder Union
Available as single units or individually bagged.
All our End feed Fittings are WRAS approved
For more information on copper End Feed Fittings visit