GEBERIT MAPRESS 45 DEG COPPER BEND WITH PLAIN ENDS
Geberit Mapress 45 Deg Copper Bend with Plain Ends suitable when a 45 deg preformed offset is required.
Geberit Fittings sizes are 12mm, 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm and 108mm
At Plumb Parts our Geberit Mapress Copper Fittings are available in following variations:
Mapress Press System
Geberit Mapress is the pipe pressing system you can press into action anywhere thus it offers a wide range of jointing materials and seal rings to cover every eventuality while providing a specialist solution for all applications.
No matter whatever the installation speed, safety, flexibility, and cost efficiency is of the highest priority Mapress offers a completely flexible, reliable solution and a seal you can be totally sure and confident of.
These fittings can be fixed wet with no draining needed and there is no cooling down required, it cuts down on installation time and downtime and is fully WRAS approved.
The fitting and pipe are pressed once the pipe has been inserted to the required insertion depth, ensuring a safe, dependable and long-lasting connection.
And thanks to installer-friendly features such as colored pressing indicators to identify materials and leak paths in the seal rings, you can press on quickly and easily with maintenance too.
Drinking water is our most valuable resource and installers are responsible for
ensuring that good quality water gets to the user. Geberit Mapress Copper
and Stainless Steel ensures safe potable water with a fast, reliable, standard-compliant installation.
Gas applications require a safe connection for such volatile media and fittings, pipes
must comply with specific requirements for gas. Geberit Mapress Copper Gas and
Stainless Steel Gas has all the necessary approvals for natural, liquefied and several
technical gases ensuring a safe, certified installation.
Compressed air applications require an airtight seal which can operate at a suitable
pressure for the situation. Geberit Mapress Stainless Steel and Copper are for use on
all compressed air installations and Geberit Mapress Carbon Steel for use with dry
compressed air requirements; all providing a reliable seal with a fast, safe installation.
Heating applications require a reliable supply of heat and for this, must rely on the
transport of the hot water from the heating system to radiators and panel heaters
with maximum heat resistance and the lowest possible flow resistance. Geberit
Mapress Copper, Stainless Steel, and Carbon Steel provides a solution with high
safety characteristics and optimized hydraulics.
Chilled water and refrigeration applications require a safe solution for
carrying water, gases and other cooling media to the air handling unit
to then distribute through either an air conditioning unit or chiller.
Geberit Mapress Copper, Stainless Steel, and Carbon Steel are
suitable materials for such application, providing a tried, tested
and a trusted seal.
Our Range of Geberit Mapress Copper Fittings includes
Couplings, Reducers, Bends, Tees, Male Adaptors, Female Adaptors, Pipe Bridges & Crossovers, Sealing, End Caps & Stop Ends, Pipe Crosses, Gas Couplings, Gas Reducers, Gas Bends, Gas Tees, Gas Adaptors, Gas Sealings, End Caps & Stop Ends